UXE-RSP4
UXE-RSP4 is a pulse counter with Modbus RTU protocol.
Appearance
Specification | |
| Power supply | 5 VDC, min 150 mA |
| Casing | DIN rail mounted
25x90x58 mm (WxHxD, 1 din module) Self-extinguishing PPO, gray |
| Pulse inputs | 4 |
| Communication | RS-485 bus |
| Connectors | Terminal block
5 mm pitch, max wire 2.5m2 (24-12AWG) |
| Operating temperature | from-40°C to +85°C |
| Properties RS-485 interface | |
| Protocol | Modbus RTU |
| Supported baudrates | from 9600 bps to 115200 bps |
| Max. load | up to 64 device on the bus |
| ESD protection | +-15 kV (HBM), +-8 kV (IEC-1000-4-2 contact discharge) |
| Properties of pulse counting inputs | |
| Isolation | non-isolated |
| ESD protection | +-15 kV (HBM) |
| Operating modes |
two modes of operation, selected independently for each input using the built-in switch, enabling counting pulses from:
• relays or potential-free outputs • active outputs |
| Voltage ranges | 0-1 VDC - 0
2,5-24 VDC - 1 |
